Product ID:S14085 TTP91, BROWN 10076
MSDS Date:04/07/1993
FSC:8010
NIIN:00-597-8199
MSDS Number: BRQPH

WARREN PAINT AND COLOR COMPANY

700 WEDGEWOOD AVE
NASHVILLE, TN 37203
US

Emergency Phone: 615-292-6655

Info Phone: 615-292-6655

Cage: 1J302

WARREN PAINT AND COLOR COMPANY

NASHVILLE, TN 37203-5526 US

Telephone: 615-292-6655

Cage: 1J302

VM&P NAPHTHA (VAPOR PRESSURE 26.9 MM HG @ 100F)

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 26.09%

TOLUENE (SARA III) (VAPOR PRESSURE 55.9 MM HG @ 100F)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 9.27%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

METHYL ETHYL KETONE (SARA III) (VAPOR PRESSURE 155.1 MM HG

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 8.69%

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

METHYL N-AMYL KETONE (VAPOR PRESSURE 2.1 MM HG @ 20C)

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 7.02%

XYLENE (SARA III) (VAPOR PRESSURE 21.2 MM HG @ 100F)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 1.87%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

MINERAL SPIRITS (VAPOR PRESSURE 6.2 MM HG @ 100F)

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 0.34%

4.68 ?

RTECS: 9999999VO

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:INHALATION: DIZZINESS, BREATHING
DIFFICULTY, HEADACHE, AND LOSS OF COORDINATION. EYE CONTACT: SEVERE
IRRITATION, TEARING, REDNESS, AND BLURRED VISION. SKIN CONTACT: CAN
DRY AND DEFAT SKIN CAUSING CRAC KS, IRRITATION, AND DERMATITIS.
INGESTION: CAN CAUSE GASTROINTESTINAL IRRITATION, VOMITING, NAUSEA,
AND DIARRHEA.
Medical Cond Aggravated by Exposure:ANESTHESIA, RESPIRATORY TRACT
IRRITATION, DERMATITIS, NAUSEA, VOMITING.

First Aid:INHALATION OVEREXPOSURE: MOVE PERSON TO FRESH AIR. IF
BREATHING STOPS, APPLY ARTIFICAIL RESPIRATION AND SEEK IMMEDIATE
MEDICAL ATTENTION. EYE CONTACT: FLUSH WITH LARGE QUANTITIES OF
WATER FOR 15 MINUT ES. SKIN CONTACT: WASH THOROUGHLY WITH SOAP AND
WATER AND SEE A DOCTOR. INGESTION: DO NOT INDUCE VOMITING, CAN
CAUSE CHEMICAL PNEUMONITIS AND PULMONARY EDEMA. CONTACT PHYSICIAN
IMMEDIATELY.

Flash Point Method:TCC
Flash Point:28.0F,-2.2C
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG,
OTHER
Fire Fighting Procedures:RESPIRATORY EQUIPMENT SHOULD BE WORN TO AVOID
INHALATION OF CONCENTRATED VAPORS. WATER SHOULD NOT BE USED EXCEPT
AS FOG TO KEEP NEARBY CONTAINERS COOL.
Unusual Fire/Explosion Hazard:HANDLE AS COMBUSTIBLE MATERIAL. VAPOR
FORM EXPLOSIVE MIX IN AIR BETWEEN VAPOR & LOWER EXPLOSION LIMITS
WHICH CAN BE IGNITED BY IGNITION SOURCES.

Spill Release Procedures:ELIMINATE IGNITION SOURCES. PROVIDE GOOD
VENTILATION. DIKE SPILL AREA AND ADD ABSORBENT EARTH OR SAWDUST TO
APPLIED LIQUID

Handling and Storage Precautions:USE NON-SPARKING UTENSILS WHEN
HANDLING THIS MATERIAL. AVOID HOT METAL SURFACES. USE IN COOL,
WELL-VENTED AREA. KEEP CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:KEEP AWAY FROM EXCESSIVE HEAT AND OPEN FLAMES.
SMOKING IN AREAS WHERE THIS MATERIAL IS USED SHOULD BE STRICTLY
PROHIBITED.

Respiratory Protection:WHEN SPRAYING, USE NIOSH CARTRIDGE
RESPIRATOR/GAS MASK SUITABLE TO KEEP AIRBORNE MIST/VAPOR
CONCENTRATIONS BELOW LIMITS. WHEN USING IN POORLY VENTED & CONFINED
AREA, USE FRESH AIR SUPPLYING RESPIRATOR OR SELF-CONTAINED
BREATHING APPARATUS.
Ventilation:USE GENERAL MECHANICAL VENT/LOCAL EXHAUST TO KEEP
CONCENTRATIONS BELOW TLV. USE EXPLOSION PROOF VENT EQUIPMENT.
Protective Gloves:IMPERMEABLE CHEMICAL HANDLING GLOVES
Eye Protection:CHEM SAFETY GLASSES, GOGGLES, FACESHIELD
Other Protective Equipment:USE IMPERMEABLE APRONS AND PROTECTIVE
CLOHTING WHENEVER POSSIBLE TO PREVENT SKIN CONTACT. USE HEADCAPS
WHEN POSSIBLE
Work Hygienic Practices:EYE WASHES AND SAFETY SHOWERS IN THE WORKPLACE
IS RECOMMENDED.
Supplemental Safety and Health

HCC:F2
Boiling Pt:B.P. Text:172 TO 307F
Vapor Density:> AIR
Evaporation Rate & Reference:9.36 (ETHYL ETHER=1)
Percent Volatiles by Volume:71.05

Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIALS, STRONG ACIDS, AND OXIDIZING MATERIALS.
Stability Condition to Avoid:EXCESSIVE HEAT, POOR VENTILATION,
CORROSIVE ATMOSPHERES, EXCESSIVE AGING.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:EXCESSIVE HEAT, POOR VENTILATION,
CORROSIVE ATMOSPHERES, EXCESSIVE AGING.

Waste Disposal Methods:COLLECT ABSORBENT/SPILLED LIQUID MIXTURE INTO
METAL CONTAINERS. CONSULT LOCAL, STATE, & FEDERAL HAZARDOUS WASTE
REGULATIONS BEFORE DISPOSING INTO APPROVED HAZARDOUS WASTE
LANDFILL. OBEY RELEVANT LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.